Description
The Manual Of The Extrudering Machine
Extruder with the environment
Extrusion machine should operation on the dedicated site within the plant.Production environment temperature should be
5-40 degrees;Voltage should be 360-400V, Power frequency 50Hz.
Extrusion machine’s working principle
The design of the operating buttons located on both sides of the fuselage near the operator, the operator can operate the
machine quickly on either side of the machine which can rotate according to the desired direction,this will continuously
convey the material from the hopper to the forming cavity.Material particle will resonance when the vibrational force
generated by the vibrator reaches a certain value,this will bring relative displacement which can fill the gap between them,so
as to achieve a balanced slab density.Materials continue to be squeezed to dense under the continuous rotation of the screw
blade,the material which have been squeezed to dense will generate reaction to the rotational blade,it can promote the
extruder forward continually, achieve a function of continuously producing s,the s will be troweled flat when through the
caudal troweling plate.This series of processes achieve the whole process of the producing.
Features and advantages of Concrete wall panel extruder
High production efficiency,
Our new type of concrete wall panel extruder can produce 1.7-3.0 meters longwall panels per minute. Its production capacity is not less than that of the well-known Acotec wall panel extruder system.
Top quality of finished panels
The wall panel made by our precast concrete wall panel extruder machine is very density uniform and compact. The cracking situation of wall panels after installation is avoided.
Easy to Operate
The high degree of mechanization， With a full hydraulic lifting device, concrete wall panel machine can move and work easily.
Saving raw materials:
The whole production process does not waste any concrete and steel wire raw materials. The waste concrete without remixing can be recycled to feed the precast concrete wall panel extruder machine at the site.
Simple production site
For the precast concrete wall panel extruder machine No need for a special concrete casting bed. The production site is only the flat concrete ground. The machine can work on an outdoor site.
Long service life
The main spare part of the precast concrete wall panel machine is with super long service life.No no need to replace the feeding screws (augers) within the period of producing the wall panels of 80,000 meters; No need to replace the vibration plate within the period of producing the wall panels of 100,000 meters.
