What should be paid attention to when the floor machine is running?-concrete slab making machine.
Floor machine selection of hard concrete, the output of the floor should be immediately sprinkled over the top with a water bottle, then cover the floor with a cover of high water content to reduce the evaporation of water, prevent the occurrence of fire cracking. During the maintenance, there must be a dedicated person, must not be ignored.Concrete planking machine
concrete slab making machine， floor machine will reach the steel terminal, do the machine end, material clean, after filling the hopper with fine sand start electromechanical, the hopper will clean the remaining material, can exchange direction.
In the use of floor machine process side, there are some small details important we users know, this is to prevent floor machine emerging weaknesses, and can make the floor has a better style, guard against unnecessary poverty thereafter. The following gives us a brief analysis of the three points of caution.
Before starting the machine, put the mixed concrete into the hopper, start the electromechanical, when the data is pushed into the lower part of the Shiver, propose the shiver immediately. Operation at any time hope hopper feed status, such as feed is not timely, stop waiting, hopper material is not lower than the middle height of the stirring shaft.
